Best Wood Stove Thermometer
What’s the best wood stove thermometer, and why would you need one? Two excellent questions, and in this best wood stove thermometer buying guide, we will answer both of those questions for you.
Wood stoves are an attractive way to heat your home. They give your room a certain ambiance that an electric fire may try to emulate but very rarely comes close to achieving. Of course, if you have no electricity or gas connections, then a wood-burning stove is one of your few remaining options.
But why do you need a wood stove thermometer? Because it’s an “at a glance” visual depiction of the stove temperature so you are instantly aware if everything is OK or if the temperature is reaching a dangerous point where it could conceivably start a fire in your chimney.
You would also buy a wood stove thermometer to ensure you’re getting the maximum efficiency from your stove.
If your stove burns at too high a temperature, then you’ll be burning too much wood. You might instinctively know you’re burning too much wood if you’re an old hand with wood stoves, but the woodstove thermometer will answer definitively by revealing the stove’s actual temperature.
If you are burning at a temperature higher than you should, then not only are you costing yourself more money, but you’re not doing anything good for the environment.
That answers why you need a thermometer for your wood stove, but you probably still want to know what’s the best wood stove thermometer before you go ahead and buy one?
That’s where this buying guide is going to help you. We have reviewed dozens of thermometers for performance and price and come up with this buying guide. In the guide, we list the thermometers that offer the best performance at the best prices. Check out our buying guide below and see for yourself.
Top 7 Best Wood Stove Thermometers
- Top 7 Best Wood Stove Thermometers
- Where To Position The Best Wood Stove Thermometer?
- What To Look For If You Want The Best Wood Stove Thermometer
1. GALAFIRE Magnetic Stove Thermometer
The Galafire stove thermometer is an aluminum design that monitors temperatures from 100 to 800 degrees Fahrenheit.
For accurate readings, the thermometer will work for a single-wall flue pipe; however, you can place it directly on the side or top of your wood stove. The thermometer is magnetized so that it will stay in position on the stove.
If you have a single-wall flue pipe and are buying the thermometer to use with that stove, then position the thermometer on the pipe approximately eighteen inches above the stove to obtain the most accurate readings.
The Galafire thermometer design makes it super easy to see the readings from the comfort of your armchair. The thick white needle stands out against the black or red background. In the center of the thermometer is a distinct color-coding that allows you to see if the fire is burning too low (yellow), just right (best zone), or too hot (red).
The manufacturers have given the thermometer a superior and classy finish of porcelain enamel that will compliment most stoves.
Why We Like It: The Galafire Thermometer can work on a single-wall flue pipe or the top or side of the woodstove.
- Measures temperatures from 100 to 800 degrees Fahrenheit
- Porcelain enamel finish compliments most stoves
- Color-coded easy-to-read zones
- The thermometer is quality aluminum
- The design features a flip-up handle to reposition the thermometer
- Stand-out white needle for easy readings
- Made in the USA
2. Frienda Magnetic Wood Stove Thermometer
The Frienda wood stove thermometer is available in packs of two and is very budget-friendly. The thermometers work exceptionally well and are highly accurate. If you happen to run a catalytic wood stove, thermometers are even more essential.
You’ll find that even though they are always near great heat, the paint on the thermometer will stay intact, and temperature gradings will stay clear and easy to read.
It’s not just the case of needing a thermometer for ensuring the temperature doesn’t get too hot; you also need to know that the fire is burning hot enough. The last thing you need is a creosote fire in the stove pipe.
The thermometer measures temperatures from 100 to 900 degrees Fahrenheit and has an excellent big dial to make life easy when you’re trying to read the dial.
It has an aluminum dial, bi-metal sensor, brass pointer, metal handle for the price; the thermometer is exceptional quality and value for money.
Why We Like It: The Frienda wood stove thermometer is a budget-friendly pack of two thermometers.
- Highly accurate
- Aluminum dial
- Clear and easy to read
- Bi-metal temperature sensor
- Temperature measurement in Fahrenheit and Celsius
3. Vermont Castings Magnetic Wood Stove Thermometer
The Vermont Castings is a top-quality wood stove thermometer and has an aesthetically pleasing design. Running a wood stove correctly and efficiently requires a quality thermometer.
If you’re breaking in a brand new stove, then a thermometer is even more essential. Generally, when breaking in a stove, you shouldn’t allow temperatures to exceed 500 degrees Fahrenheit. If you do, there’s a risk you can crack the cast iron.
The Vermont Castings thermometer is more expensive than average but well worth it because it’s super-quality and will outlast most, if not all, of the competition. You’ll also find the temperature reading is exceptionally accurate.
The thermometer measures a temperature range from 100 to 700 degrees Fahrenheit and has a double function; it also measures the top of the stove’s surface temperature for cooking.
Why We Like It: The Vermont Castings is a magnetic thermometer with the double function of monitoring surface temperature and stove performance.
- Dual measuring scale for Celsius and Fahrenheit
- Monitors the stove’s surface temperature
- Also monitors stove performance
- Top-quality materials
- Measures in the range of 100 to 700 degrees Fahrenheit
4. Condar ChimGard Woodstove Thermometer
The Condar ChimGard model 3-4 is one of the best stovepipe thermometers on the market; combining high-quality materials with one of the easiest to read dials will ensure you get many years of use from this thermometer.
A rugged steel case and genuine porcelain enamel allow the thermometer to show temperatures up to 900 degrees Fahrenheit or 500 degrees Celsius.
The dial face is color-coded, so just a glance will inform you of how your fire is burning. Yellow represents too cold, and orange is the ideal zone, and red for too hot. You also cannot miss the bright white indicator from across your living room.
The ChimGard thermometer is also magnetic so finding the best location and placing it on the stovepipe or top of your wood stove is pretty simple. If you need to move the thermometer’s position, there’s no danger of burning yourself with the cool-touch metal bail (handle). There’s also a safety screw you can use to attach the thermometer to the stovepipe if you feel it may fall off with only the magnet holding it in place.
With the easy-to-read dial, it’s easy to see from across the room if you’re burning hot enough (creosote build-up can cause fires); if you’re not, you need to open the flue up a little more.
Why We Like It: The Condar ChimGard is one of the best-made and most straightforward to read from a distance, wood stove thermometers available.
- A rugged steel case
- Genuine porcelain enamel dial
- Temperature gauge up to 900 degrees Fahrenheit
- Fixing screw included
- Includes Condar’s flue temperature sensor
- Cool-touch metal bail
- Color-coded temperature gauge
- Made in the USA
5. Condar StoneGard Stove Top Thermometer
The Condar StoneGard thermometer is exclusively for use on soapstone wood stoves. Because of its heat retention properties, soapstone stoves require a special thermometer, and a typical wood stove thermometer wouldn’t work nearly as well.
A soapstone stove will absorb heat from a fire and has a tremendous heat retention capability, and it will radiate that heat for a long time. This capability has two advantages over more typical stoves because it maximizes the amount of heat yet still burns less wood. The experts suggest that soapstone stoves store twice the amount of heat as a steel or cast-iron stove.
The Condar Soapstone thermometer will perform three main functions for you if you own a soapstone wood stove. First, it will help you to prevent your stove from cracking because you have overheated the stove. Second, the thermometer will help you burn fuel more efficiently, and third, it will help maximize your stove’s life.
The dial is clear and straightforward to read with four prescribed zones, too cool, low burn, optimal burn, and too hot. All the dial is in black and gray except the too hot zone, which is in red; the indicator is a bright white. Position the thermometer in the top center area of your soapstone stove.
The perfect operating temperatures of soapstone stoves are lower than conventional steel or cast-iron stoves, which is another reason why thermometers are an essential item for these stoves. A soapstone stove’s operating temperature should not exceed 600 degrees Fahrenheit consistently or run the risk of cracking the stove.
Why We Like It: The Condar Soapstone thermometer is an exclusive design for use only on soapstone wood-burning stoves.
- Thermometer exclusive for soapstone stoves
- Black and gray design
- Four burning zones
- Temperature range between 100 to 700 degrees Fahrenheit
- High-quality materials
- Made in the USA
6. Inferno Stove Top Meter (3-30) Thermometer
When you buy the Inferno thermometer, you are getting one explicitly calibrated for the stovetop and not for positioning on the stovepipe.
This thermometer is of robust steel with a porcelain enamel dial that’s straightforward to read with the burn zones clearly marked; dark gray for creosote, light gray for the best zone, and red for too hot. The temperature range is from 100 to 700 degrees Fahrenheit. There’s a small wire bail that’s handy if you need to move the thermometer’s location for some reason.
A thermometer such as the Inferno is an essential item for a wood-burning stove because a considerable problem is unknowingly burning fires not hot enough and allowing a creosote build-up in the chimney. This creosote build-up can catch fire and is a significant reason why the fire department has to attend to so many stove fires.
Why We Like It: The Inferno Thermometer is one of the best stovetop thermometers on the market.
- Temperature range from 100 to 700 degrees Fahrenheit
- Incorporates three clearly marked burning zones
- Robust steel construction
- Porcelain enamel dial
- Small wire bail
- It is calibrated for stovetop use only
- Made in the USA
7. Midwest Hearth Wood Stove Thermometer
The Midwest stove thermometer is a great-looking thermometer with colorful fire-burning zones that register yellow creosote (too cool burn), orange best zone, and red too hot zone. The temperature gauge runs from 100 to 700 degrees Fahrenheit, and that again is also instantly readable with a black background and white numerals. The indicator is a medium gray color that stands out against the black background.
The Midwest Hearth is only for use on the stove-top; the temperature calibrations specifically reflect those temperatures and not from the stovepipe. To help the thermometer stay in place, it has a magnetic attachment that will withstand temperatures up to 800 degrees Fahrenheit before it fails.
The optimum burning temperature of wood-burning stoves is between 400 to 650 degrees Fahrenheit. If you consistently allow your fire to burn below 400 degrees Fahrenheit, you run the risk of allowing a creosote build-up, which, as we have previously mentioned, is a severe fire risk. On the Midwest Hearth dial, you can see that marked in yellow with the word CREOSOTE.
Temperatures above 650 degrees burn too much wood and are not cost-effective because the excess energy goes up the stovepipe and doesn’t heat the room.
Why We Like It: The Midwest Hearth is a top-quality stovetop thermometer and accurately measures the stove’s temperature.
- Records a temperature range from 100 to 700 degrees Fahrenheit
- Magnet holds the thermometer in position
- Stove-top thermometer
- It is made from robust steel
- The dial is porcelain enamel
- Wire handle
- Easy to read zones
Where To Position The Best Wood Stove Thermometer?
Once you have the wood-stove thermometer in your possession, you need to understand the best place to position it on your stove. If you have purchased the thermometer’s stovetop version, the experts recommend placing it in a top-center location on the stove.
The aim of any of these wood-stove thermometers is accurately monitoring your stove’s temperature at all times. In this way, you can ensure you burn wood at the optimum temperature, meaning you don’t burn too cool, allowing a creosote build-up, neither do you burn too hot and waste wood and run the risk of cracking your stove.
If you have a single-wall stovepipe, the best position for that specific thermometer is approximately eighteen inches above the stove. You would then place the thermometer onto the stovepipe by either the thermometer’s magnet or fixing the thermometer with the accompanying screw.
A double-wall stovepipe is a little more complicated because you need to drill a hole through both walls so the thermometer’s probe can access the center of the flue.
What To Look For If You Want The Best Wood Stove Thermometer
Having a wood stove thermometer that provides accurate readings, stands the test of time, and doesn’t have a magnet that fails are three essential features to look out for when trying to find the best wood stove thermometers available.
Suppose the thermometer is not reliable, for example. In that case, the temperature range doesn’t function correctly; you might be running the risk of setting fire to your flue or wasting fuel, which is no good for your wallet or the environment.
The dial of the thermometer should be easily readable, at a glance, really. The manufacturers use colors for the burn zones and a good definition between the background and the numerical temperature values. A good example would be a black background with white numerals. The burning zones might be yellow for too cool, orange for the optimum burning zone, and red for burning too hot.
The temperature indicator would need to be a medium-gray color to stand out between the rest of the dial’s black and white colors.
In terms of material, we suggest buying only quality porcelain enamel. This sturdy material will stand the test of time and will not fade because of high temperatures exposure.
Nearly all the dials on wood-stove thermometers read in Fahrenheit, which in most cases is fine. But sometimes, it might be necessary to know the temperature in Celsius. If you think you might have cause to need a Celsius scale, then purchase the thermometer with both temperature ranges.
The Correct Temperature Range
Most wood-burning stoves shouldn’t burn over 600 degrees Fahrenheit, at least not for prolonged periods. So, the most common range of thermometers is between 100 and 700 degrees Fahrenheit.
However, if you have a substantial wood-burning stove, you might need a thermometer capable of reading temperatures up to 900 degrees Fahrenheit.
Heed the warnings on your stove and the best wood stove thermometer you purchase. Operating wood-burning stoves at low temperatures is a definite fire-hazard over time. Many fire departments in the US have to contend with flue fires from wood-burning stoves having a creosote build-up that’s burst into flames.
If you burn too hot, you have a double issue of costing yourself money unnecessarily and running the risk of cracking your stove.